TMJ PP 602 GCNC BANDSAW
BAND SAW WITH COLUMN GUIDES
The TMJ PP 602 GCNC is a fully automatic, electrohydraulic, CNC band saw machine for metal cutting, dedicated to straight cuts, with the ability to mitre cut from 90° to 60° right in automatic mode. The bandsaw's extremely rigid machine stand and saw arm strength ensure a long life and exceptional accuracy. Its two-column, solid steel construction forms a closed frame, ensuring perfect rigidity.
The bandsaw is controlled by means of a microprocessor control system with a screen and keyboard to program the required functions. The machine stops when the number of functions set is achieved, when the saw blade breaks, and when there is missing material. The bandsaw is equipped with hydraulic feeding of material up to 500m in length (arbitrarily repeatable) with continuously adjustable accuracy of ± 0,1 mm.
BASIC EQUIPMENT |
PP 602 GCNC |
---|---|
MACHINE STAND |
Built-in hydraulic unit Built-in coolant pump and tank Sliding box for chips |
SAW ARM |
Travels up and down by means of hydraulic cylinder, with its piston rod formed by a chrome-plated guiding column. Upper position can be adjusted based on the height of material to be cut. |
SAW BLADE |
Smooth run of the saw blade is ensured by two heavily-dimensioned guideways with guide rollers and carbide blocks. Movable guide arm of the saw blade can be adjusted to the width of the material, resulting in precision and clean cuts. Proper tensioning of the saw blade is regulated by adjusting spindle and Belleville springs. |
CONTROL OF RUN |
Feeding speed of saw arm towards the material is realised through a throttle valve. Saw blade pressure into the cut is controlled by an automatic valve (derived from cutting resistance), which regulates feeding speed into the cut by solid material to conform to cutting conditions set and to prevent overloading the of saw blade. In case of saw blade breakage, the machine stops automatically. |
CONTROL SYSTEM |
Control system B+R. All functions of the band saw are controlled by means of virtual buttons on the touchscreen ofthe control system, which are marked with comprehensive symbols. Everything is displayed on a large graphic screen with information on settings of technological and operating parameters. Possibility to enter different programs, where up to 100 different lengths, number of pieces and cutting speeds for each program can be set. Possibility to choose language version, metric or inch units. System identifies failures and saves them into memory along with respective date and time. Electrohydraulic feeding of material up to length of 500 mm per stroke can be repeated arbitrarily with continuously adjustable mechanic back stop of accuracy of ± 0.1 mm. |
OTHER |
Complete electrical equipment 400 V/50 Hz Control voltage 24 V DC Built-in central control panel on the machine stand Invertor for the saw blade speed control, continuously adjustable cutting speed 15-88 m/min Hydraulic clamping of material Cleaning brush of saw blade Instruction manual Documentation CE Standard |
CUTTING RANGE - TECHNICAL DATA
CUTTING RANGE |
|
|
|
|
---|---|---|---|---|
Cutting range |
° |
90° |
45° |
60° |
Maximum diameter of material |
mm |
600 |
420 |
270 |
Maximum dimensions of material |
mm |
600 x 600 |
420 x 600 |
270 x 600 |
TECHNICAL DATA |
|
|
---|---|---|
Saw blade size |
mm |
6200 x 41 x 1,3 |
Saw blade inclination |
° |
0 |
Main motor Hydraulic motor coolant pump motor |
kW |
4 1,1 0,09 0,37 |
Cutting speed |
m/min |
10 - 115 |
Material feed, simple stroke, arbitrarily repeatable |
mm |
500 |
Feeding accuracy |
mm |
± 0,1 |
Residual piece in automatic mode |
mm |
270 |
Working height |
mm |
700 |
Machine weight (without accessories) |
kg |
2550 |
Dimensions (l x w x h) |
mm |
3150 x 2270 x 2250 |
Blades for this machine are available here
Carriage is £10+ VAT or FREE when you order more than 5 Blades. We accept paypal or credit and debit cards.
All Enquiries
Saws UK: Providing you with the right saw for the right purpose. We commission and we service. All backed up with a 10 Year warranty*