Contact us label
Close form icon

TMJ PP 302 GCNC 

BAND SAW WITH COLUMN GUIDES 
The TMJ PP 302 GCNC is a fully automatic, electrohydraulic, CNC band saw machine for metal cutting, dedicated to straight cuts, with the ability to mitre cut from 90° to 60° right in automatic mode. The bandsaw's extremely rigid machine stand and saw arm strength ensure a long life and exceptional accuracy. Its two-column, solid steel construction forms a closed frame, ensuring perfect rigidity. 
 
The bandsaw is controlled by means of a microprocessor control system with a screen and keyboard to program the required functions. The machine stops when the number of functions set is achieved, when the saw blade breaks, and when there is missing material. The bandsaw is equipped with electronic feeding of material up to 600m in length by means of a ball screw (arbitrarily repeatable) and with step feeding from the rear position with accuracy ± 0,1 mm. 
BASIC EQUIPMENT 
PP 302 GCNC 
MACHINE STAND 
Built-in hydraulic unit 
Built-in coolant pump and tank 
Sliding box for chips 
SAW ARM 
Travels up and down by means of hydraulic cylinder; the piston rod is formed by chrome-plated guiding column. 
Upper position can be adjusted based on the height of material to be cut. 
The saw blade is set to a contact surface of material in inclination of 3°, this results in optimum teeth mesh, better cutting performance, a higher quality of the cut and a slow entry and exit of the saw band at various material cross sections. 
Angle of cut can be set continuously without a change in clamping of material. 
SAW BLADE 
Smooth run of the saw blade is ensured by two heavily-dimensioned guideways with guide rollers and carbide blocks. 
Movable guide arm of the saw blade can be adjusted to width of material, resulting in precision and a clean cut. 
Proper tensioning of the saw blade is regulated by adjusting spindle and Belleville springs. 
CONTROL OF RUN 
Feeding speed of the saw arm towards the material is realised through a throttle valve. 
Saw blade pressure into the cut is controlled by an automatic valve (derived from cutting resistance), which regulates feeding speed into cut by solid material to conform to cutting conditions set and to prevent overloading the of saw blade. 
In case of saw blade breakage, the machine stops automatically. 
CONTROL SYSTEM 
Control system B+R. 
All functions of the band saw are controlled by means of virtual buttons on the touchscreen of the control system, which are marked with comprehensive symbols displayed on a large graphic screen with information on settings of technological and operating parameters. 
Possibility to enter different programs, where up to 100 different lengths, number of pieces and cutting speed for each program can be set. 
Possibility to choose language version, metric or inch units. 
System identifies failures and saves them into memory along with respective date and time. 
Electronic feeding of material up to length of 600 mm per each stroke can be repeated arbitrarily with step feeding from the rear position of accuracy ± 0,1 mm. 
OTHER 
Complete electrical equipment 400 V/50 Hz 
Control voltage 24 V DC 
Built-in central control panel on the machine stand 
Invertor for the saw blade speed control, continuously adjustable cutting speed 10-115 m/min 
Hydraulic clamping of material 
Cleaning brush of saw blade 
Instruction manual 
Documentation 
CE Standard 
TMJ PP 302 GCNC
Blades for this machine are available here 
Carriage is £10+ VAT or FREE when you order more than 5 Blades. We accept paypal or credit and debit cards. 
TMJ PP 302 GCNC bandsaw blade. Size: 3660 x 27 x 0.9 Tooth Pitch: 4-6
TMJ PP 302 GCNC Blade
£31.30 exc. VAT
Quantity discounts:
6+ £28.17 exc. VAT
10+ £25.04 exc. VAT
Quantity:
CUTTING RANGE - TECHNICAL DATA 
CUTTING RANGE 
 
 
 
 
Cutting range 
° 
90° 
45° 
60° 
Maximum diameter of material 
mm 
305 
255 
125 
Maximum dimensions of material 
mm 
360 x 305 
255 x 305 
125 x 305 
TECHNICAL DATA 
 
 
Saw blade size 
mm 
3660 x 27 x 0,9 
Saw blade inclination 
° 
3 
Main motor Hydraulic motor coolant pump motor 
kW 
2,2 0,55 0,09 
Cutting speed 
m/min 
10 - 115 
Material feed, simple stroke, arbitrarily repeatable 
mm 
600 
Feeding accuracy 
mm 
± 0,1 
Residual piece in automatic mode 
mm 
200 
Working height 
mm 
700 
Machine weight (without accessories) 
kg 
1200 
Dimensions (l x w x h) 
mm 
1800 x 2040 x 1650 

All Enquiries 

Alligator Bandsaws
Doall bandsaws
HM Machinery
Carif Bandsaws
TMJ Bandsaws
ACM Bandsaws
Bonetti Bandsaws
Macc Saws
Klaeger bandsaws
Comet Circular Saws
Saws UK: Providing you with the right saw for the right purpose. We commission and we service. All backed up with a 10 Year warranty* 
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings