Rusch 620 MAX GA

An automatic mitre cutting bandsaw machine. Management of the fully automatic cutting cycle with automatic closing of the vice, rapid approach of the arc with bar feeler, management of the descent speed of the arc by means of a hydraulic regulator, blade speed adjustment by means of a potentiometer during cutting, end of cut with automatic arc rising up to workpiece height and automatic opening of the vice to free the material. Blade width 41mm.

Possibility of cutting from + 60 ° to -60 °.

Hydraulic plant.

Hydraulic bow descent adjustment.

Hydraulic adjustment of the opening and closing of the vice.

Closing and opening selection of the vice at the end of the cycle.

High arch and low arch adjustment.

Quick approach to the arc with a feeler.

Automatic ascent of the arch above the piece.

Blade rotation speed adjustment by inverter.

Machine stop in case of blade break or insufficient tension.

Electric pump for blade lubrication.

Safety key switch on the blade guard casing.

Brush blade cleaning device.

Command pulpit.

Max Capacity	Round 90° Square 90° Rectangle 90° Round -45° Square -45° Rectangle -45° Round -60° Square -60° Rectangle -60° Round +45° Square +45° Rectangle +45° Round +60° Square +60° Rectangle +60°	500mm 500mm 620x500mm 450mm 420mm 440x380mm 300mm 300mm 300x350mm 450mm 450mm 450x500mm 310mm 310mm 310x500mm
Operation	Automatic
Blade	Size Speeds	5250x41x1.3mm 20–150m/min
Motor	Power Voltage	3kw 24V–400V
Coolant Pump Motor	—	0.37kw
Working height		750mm
Weights & Sizes	Weight	3200kg
	Dimensions	4800x2650x1600 mm