Alligator KPM Loader Automatic bar loader for Alligator Master series bandsaws
The Alligator KPM Loader provides fully automated material feeding for compatible Master series bandsaws, helping to increase productivity, reduce manual handling and improve operator safety. Its foldable loading section can be loaded by crane or forklift and accommodates round and rectangular materials, including tubes, solid bars, beams and flat bars.
Controlled directly from the saw through its PLC system and PilOS operating software, the loader transfers individual lengths onto a powered roller conveyor. Each piece is automatically aligned, fed into the feed vice and accurately positioned for cutting.
The conveyor speed is synchronised with the saw’s feed vice to prevent unwanted sliding and help protect the material’s surface. Once the stock is loaded and the cutting programme is set, the system automatically manages material feeding, clamping and positioning throughout the cutting cycle.
Available in 3 metre and 6 metre versions.
|
Parameter |
KPM 3 m |
KPM 6 m |
|---|---|---|
|
Maximum bar length |
4 m |
7 m |
|
Minimum bar length |
2 m |
2 m |
|
Number of cross arms |
3 |
5 |
|
Total weight |
650 kg |
900 kg |
|
Static load per cross arm |
800 kg |
800 kg |
|
Magazine tilt angles |
2°, 7°, 12°, 17°, 22°, 27° |
2°, 7°, 12°, 17°, 22°, 27° |
|
Power input |
1.1 kW |
1.1 kW |
|
Smallest diameter conveyed |
10 mm |
10 mm |
|
Largest diameter conveyed |
160 mm |
160 mm |
|
Material height above floor |
772 - 1022 mm |
772 - 1022 mm |
All Enquiries
TYPICALLY what do you cut? We have the machine for you
Saws UK: Providing you with the right saw for the right purpose. We commission and we service. All backed up with a 1 Year warranty*