Rusch 315 PD Pulldown Manual Saw

Manual bandsaw for cuts from 60° right to 45° left.

Electro-welded steel base that incorporates the cooling tank with electric pump.

Cast iron arch inclined by 30 ° with respect to the Z axis which considerably reduces the straightening of the blade, allowing it less torsion and consequently longer life.

Flywheels mounted on precision roller bearings.

Solid structure of the blade guide arms that make them free from twisting and vibrations.

Manual vice movement with handwheel.

Blade tensioning by handwheel with fixed mechanical stop. (1200 kg blade draft).

Stops for cutting at 0 °, -45 °, 60 ° with lever for locking at any angle.

Eccentric arc pin adjustable by 2 spherical roller bearings.

Blade guide with 4 WIDIA plates and 4 adjustable eccentric pre-alignment bearings.

Brush blade cleaning device.

Electrical system compliant with CE standards. Standard connection voltage 400V. Command voltages 24 Volt cc

Speed variation selectable between 36 and 70 m / min by means of a selector on the control panel.

Coolant pump connected to several nozzles that provide for blade lubrication.

The controls of the saw are centralised on a single panel. They include: Main switch, line button and blade speed selector.

The saw is supplied with a CE certificate and supplied in compliance with international safety standards.

STANDARD EQUIPMENT: Instruction manual, 1 tape, material support, bar stop rod.

Optional Extras

2 meter loading roller conveyor.

2 meter unloading roller conveyor.

2 meter unloading roller conveyor with measurement stop.

Max Capacity	Round 90° Square 90° Rectangle 90° Round 45° Square 45° Rectangle 45° Round 60° Square 60° Rectangle 60°	250mm 250mm 315x170mm 220mm 200mm 210x170mm 120mm 120mm 120x150 mm
Operation	Manual
Blade	Size Speeds	2825x27x0.9mm 36–70m/min
Motor	Power Voltage	0.75–1.1kw 24V–400V
Pump Motor	—	0.06kw
Working height		980mm
Weights & Sizes	Weight	360kg
	Dimensions	1350x700x1500mm