Meber PROF 400 Bandsaw
Produced to last over time and to reduce maintenance to minimum:
Brush to remove dust and encrustations.
Double intake to ensure optimum sawdust exhaust and to guarantee a healthy working environment
Flywheel seals with easily interchangeable, long-life hytrel rings.
Maximum operating comfort and absolute safety according to current standards:
Complete protection of sawblade and all moving parts.
Electric installations certified to |SO 9000 — EN 29000 standards
Machines already tested as to noise level and sawdust emission according to European standards
Standard Equipment
Self-Braking Motor
Solid Flywheels, rubber covered
Cleaning Brush on lower wheel
Cast Iron Tilting Table, 0-20 degrees
Blade Tension Gauge
Parallel Fence on Table
Upper and Lower Saw Blade Guide with Rollers
Emergency Stop Switch
Available as Three Phase or Single Phase
Meber PROF 400
Flywheel Diameter (mm) |
400 |
---|---|
Cutting Capacity (mm) W x H |
390 x 225 |
Max Blade Length (mm) |
3160 |
Max Blade Width (mm) |
25 |
Blade Speed (mt/min) |
1140 mt/min |
Flywheels Speed (R.P.M) |
781 rpm |
Table Size (mm) |
500 x 400 |
Motor Power Hp |
Hp 1.5 |
New Weight Kg |
120kg |
Optional Accessories
Lower Saw Blade Guide with Bearing System
Mitre Fence
Charge to increase motor power to 2HP
Emergency Red Button
Mobility Kit (Wheels System)
Column on the righthand side
Ruler Scale on the Table
Foot Operated Emergency Button
Padlock able Door
Key for starting operation
All Enquiries
Saws UK: Providing you with the right saw for the right purpose. We commission and we service. All backed up with a 10 Year warranty*