Rusch 240R PD

Pulldown Manual Saw

Available in single and three phase

Electro-welded steel base that incorporates the cooling tank with electric pump.

Cast iron arch inclined by 30 ° with respect to the Z axis which considerably reduces the straightening of the blade, allowing it less torsion and consequently longer life.

Flywheels mounted on precision roller bearings.

Solid structure of the blade guide arms that make them free from twisting and vibrations.

Manual vice movement with handwheel and lever for quick locking.

Blade tensioning by handwheel with fixed mechanical stop. (900 kg blade draft).

Stops for cutting at 0 °, 60 ° with lever for locking at any angle.

Eccentric arc pin adjustable by 2 spherical roller bearings.

Coolant pump connected to several nozzles that provide for blade lubrication.

Electrical system compliant with CE standards. Standard connection voltage 400V. Command voltages 24 Volt cc

Speed variation selectable between 40 and 80 m / min by means of a selector on the control panel.

The controls of the saw are centralised on a single panel. They include: Main switch, line button and blade speed selector.

The saw is supplied with a CE certificate and supplied in compliance with international safety standards.

STANDARD EQUIPMENT: Instruction manual, 1 tape, material support, bar stop rod.

Optional Extras

2 meter loading roller conveyor.

2 meter unloading roller conveyor.

2 meter unloading roller conveyor with measurement stop.

Max Capacity	Tube 90° Square 90° Bar 90° Tube 45° Square 45° Bar 45° Tube 60° Square 60° Bar 60°	240mm 200mm 240x150mm 150mm 150mm 150x125mm 85mm 70mm 195x70mm
Operation	Manual
Blade	Size Speeds	2455x27x0.9 40–80 m/min
Motor	Power Voltage	0.75–1.1kw 24V–400V
Pump Motor	—	0.06 kw
Working height		980mm
Weights & Sizes	Weight	220
	Dimensions	1500x700x1600Hmm