Rusch 200R PD

Pulldown manual saw

Available in single and three phase

Electro-welded steel base that incorporates the cooling tank with electric pump.

Cast iron arch inclined by 30 ° with respect to the Z axis which considerably reduces the straightening of the blade, allowing it less torsion and consequently longer life.

Flywheels mounted on precision roller bearings.

Solid structure of the blade guide arms that make them free from twisting and vibrations.

Manual vice movement with handwheel and lever for quick locking.

Blade tensioning by handwheel with fixed mechanical stop. (900 kg blade draft).

Stops for cutting at 0 °, 60 ° with lever for locking at any angle.

Eccentric arc pin adjustable by 2 spherical roller bearings.

Coolant pump connected to several nozzles that provide for blade lubrication.

Electrical system is compliant with CE standards. Standard connection voltage 400V. Command voltages 24 Volt cc

Speed variation is selectable between 40 and 80 m / min by means of a selector on the control panel.

The controls of the saw are centralised on a single panel. They include: Main switch, line button and blade speed selector.

The saw is supplied with a CE certificate and supplied in compliance with international safety standards.

STANDARD EQUIPMENT: Instruction manual, 1 tape, material support, bar stop rod.

Optional Extras

2 meter loading roller conveyor.

2 meter unloading roller conveyor.

2 meter unloading roller conveyor with measurement stop.

Max Capacity	Tube 90° Square 90° Bar 90° Tube 45° Square 45° Bar 45°	170mm 170mm 200x150mm 120mm 110mm 115x110mm
Operation	Manual
Blade	Size Speeds	2085x20x0.9 40–80m/min
Motor	Power Voltage	0.75–1.1 kw 24V–400V
Pump Motor	—	0.06 kw
Working height		980mm
Weights & Sizes	Weight
	Dimensions	1280x510x1370 mm