Pedrazzoli Brown SN 420 MRM Double Mitre Pull Down Bandsaw

Italian built and cast iron rigid, the Brown SN 420 is a dependable manual pull bandsaw for clean, accurate cutting of tube, box and sections. A worm drive gearbox in an oil bath and a vertical motor keep the cut smooth and quiet, while a large circular support table rotates on a tempered ball track for precise set ups. The bow has fixed stops for fast mitres to 45° right and 45–60° left. Carbide blade guides with bearings, uniform blade tensioning and flood lubrication with an electric pump protect the blade and deliver repeatable results. The adjustable manual vice positions along the base, with retractable shoulders so you can use the full 420 × 190mm capacity at 90°. Safety is built in with a low voltage trigger switch start and an emergency stop.

Two speed, three phase drive (400 V, 50 Hz; other voltages on request)

Cast iron construction for low noise and vibration

Worm drive gearbox in oil bath for smooth power transmission

Large rotating circular support table on tempered ball track for precise, easy positioning

Mitres with mechanical stops: 45° right, 45–60° left

Carbide blade guides with bearings on eccentric bushings for accuracy

Adjustable manual vice that slides along the base; rapid closing, handwheel and flat adjustable gib plate

Retractable and adjustable vice shoulders to access full 420 × 190mm capacity at 90° and align work accurately

Uniform blade tension device for consistent cutting

Blade lubrication and cooling with electric pump and two adjustable taps at the guides

Accessible control panel with on/off, 2-speed selector, emergency stop

Low voltage trigger switch start and covered blade drive safety switch

Hinged bow running on conical bearings for long service life

Safety regulations according to CE Standards

TECHNICAL SPECIFICATIONS

Max Capacity	Round 90° Square 90° Rectangle 90° Round +45° Square +45° Rectangle +45° Round +60° Square +60° Rectangle +60° Round -45° Square -45° Rectangle -45°	280mm 270mm x 270mm 420mm x 190mm 230mm 220mm x 220mm 230mm x 150mm 150mm 150mm x 150mm 140mm x 220mm 170mm 150mm x 150mm 240mm x 90mm
Operation	Double Mitre Pull Down Bandsaw
Blade	Length Speeds m/min	3150 x 27 x 0.9mm 30 or 70m/min
Motor	Power	1.6- 2kW
Coolant Tank	Lubrication	14L
Weights & Sizes	Weight	550Kg
	Dimensions	870x1860x2100mm
	Bed Height	955mm
Max Jaw Opening		420mm

SPECIAL VICE FEATURES

Vice opening with centred shoulders	335mm
Vice opening with shoulders backwards	420mm
Shoulders backing from the centre	85mm
Longitudinal displacement left shoulder jaw	85mm
Jaws height truck and shoulders	150mm
Truck jaw length	240mm
Shoulders jaws length	317mm
Circular support surface base Ø	460mm
Clamping force	350kg
Height of the vice work surface	955mm