TMJ PP 362 G BANDSAW

BAND SAW WITH COLUMN GUIDES

The TMJ PP 362 G is a semi-automatic, electrohydraulic, double column band saw machine for metal, dedicated for straight cuts with a possibility of mitre cutting from 90° to 60° right. Its extremely rigid machine stand and saw arm strength ensure a long life and exceptional accuracy. Its two-column solid steel construction forms a closed frame, ensuring perfect rigidity.

The respective angle can be set continuously without a change to the clamping of the material.

BASIC EQUIPMENT	PP 302 G
MACHINE STAND	Built-in hydraulic unit Built-in coolant pump and tank Sliding box for chips
SAW ARM	Travels up and down by means of hydraulic cylinder; its piston rod is formed by chrome-plated guiding column. Upper position can be adjusted based on the height of material to be cut. The saw blade is set to a contact surface of material in inclination of 3°; this results in optimum teeth mesh, better cutting performance, a higher quality of the cut and a slow entry and exit of the saw band at various material cross sections. Angle of the cut can be set continuous without a change in clamping of material.
SAW BLADE	Smooth run of the saw blade is ensured by two heavily-dimensioned guideways with guide rollers and carbide blocks. Movable guide arm of the saw blade can be adjusted to width of material, resulting in greater precision and cleaner cuts. Proper tensioning of the saw blade is regulated by adjusting spindle and Belleville springs.
CONTROL OF RUN	Feeding speed of saw arm towards material is realised through a throttle valve. Saw blade pressure into cut is controlled by an automatic valve (derived from cutting resistance), which regulates feeding speed into the cut by solid material to conform to cutting conditions set and to prevent overloading of the saw blade. In case of saw blade breakage, the machine stops automatically.
OPERATION	Eccentric roller for lifting the material while feeding it in vice. Repeated cuts can be set on mechanical back stop up to 1000 mm.
OTHER	Complete electrical equipment 400 V/50 Hz Control voltage 24 V DC Built-in central control panel on the machine stand Invertor for the saw blade speed control, continuously adjustable cutting speed 15-88 m/min Hydraulic clamping of material Cleaning brush of saw blade Instruction manual Documentation CE Standard

Call 01892 663398

Blades for this machine are available here

Carriage is £10+ VAT or FREE when you order more than 5 Blades. We accept paypal or credit and debit cards.

CUTTING RANGE - TECHNICAL DATA

CUTTING RANGE
Cutting range	°	90°	45°	60°
Maximum diameter of material	mm	360	305	175
Maximum dimensions of material	mm	430 x 360	305 x 360	175 x 360

TECHNICAL DATA
Saw blade size	mm	4400 x 34 x 1,1
Saw blade inclination	°	3
Main motor Hydraulic motor coolant pump motor	kW	2,2 0,55 0,09
Cutting speed	m/min	15 - 88
Working height	mm	700
Machine weight (without accessories)	kg	1090
Dimensions (l x w x h)	mm	2170 x 1220 x 1820