TMJ PP 302 G BANDSAW MACHINE

BAND SAW WITH COLUMN GUIDES

The TMJ PP 302 G is a semi-automatic, electrohydraulic band saw machine for metal cutting. It is a one column bandsaw, dedicated for straight cuts with the possibility of mitre cutting from 90° to 60° right. Respective angles can be set continuously without a change to the clamping of material.

BASIC EQUIPMENT	PP 302 G
MACHINE STAND	Built-in hydraulic unit Built-in coolant pump and tank Sliding box for chips
SAW ARM	Travels up and down by means of hydraulic cylinder; the piston rod is formed by a chrome-plated guiding column. Upper position can be adjusted based on the height of material to be cut. The saw blade is set to a contact surface of material in inclination of 3°; this results in optimum teeth mesh, better cutting performance, a higher quality of the cut and a slow entry and exit of the saw band at various material cross sections. The angle of the cut can be set continuously without a change in clamping of material.
SAW BLADE	Smooth run of the saw blade is ensured by two heavily-dimensioned guideways with guide rollers and carbide blocks. Movable guide arm of the saw blade can be adjusted to the width of the material, resulting in greater precision and a cleaner cut. Proper tensioning of the saw blade is regulated by adjusting the spindle and Belleville springs.
CONTROL OF RUN	Feeding speed of the saw arm towards the material is realised through a throttle valve. The saw blade pressure into the cut is controlled by an automatic valve (derived from cutting resistance), which regulates the feeding speed into the cut to conform to cutting conditions set and to prevent overloading of the saw blade. In case of saw blade breakage, the machine stops automatically.
OPERATION	Eccentric roller for lifting the material while feeding it in vice. Repeated cuts can be set on mechanical back stop up to 1000 mm.
OTHER	Complete electrical equipment 400 V/50 Hz Control voltage 24 V DC Built-in central control panel on the machine stand Invertor for the saw blade speed control, continuously adjustable cutting speed 16-73 m/min Hydraulic clamping of material Cleaning brush of saw blade Instruction manual Documentation CE Standard

Call 01892 663398

Blades for this machine are available here

Carriage is £10+ VAT or FREE when you order more than 5 Blades. We accept paypal or credit and debit cards.

CUTTING RANGE - TECHNICAL DATA

CUTTING RANGE
Cutting range	°	90°	45°	60°
Maximum diameter of material	mm	305	255	125
Maximum dimensions of material	mm	360 x 305	255 x 305	125 x 305

TECHNICAL DATA
Saw blade size	mm	3660 x 27 x 0,9
Saw blade inclination	°	3
Main motor Hydraulic motor coolant pump motor	kW	1,5 0,55 0,09
Cutting speed	m/min	16 - 73
Working height	mm	700
Machine weight (without accessories)	kg	780
Dimensions (l x w x h)	mm	1800 x 1140 x 1650