Not all bandsaws are built the same, and if you've spent any time cutting solids, tubes or sections in stainless steel, mild steel, non-ferrous metals or plastics, you'll know why that matters.
The right bandsaw isn't simply the one with the biggest capacity or the longest list of features. It's the machine that matches the material you're cutting, the size of the sections you're processing, the number of cuts you need to make and how much operator input you want from day to day.
Alligator bandsaws have been a workshop staple for nearly 30 years, earning a strong reputation for reliable, heavy duty performance. They're European built and designed for demanding workshop environments, with different models using gravity feed, hydraulic control or pull-down mechanisms depending on the machine, and the range covers everything from straightforward manual machines for general fabrication through to fully automatic, touch screen CNC models capable of handling sections up to 700mm jaw capacity. If you need to go larger still, our semi-automatic dual column range reaches as far as 1100mm jaw capacity.
That's a lot of choice to get your head around.
So rather than simply listing the machines and their specifications, this guide looks at what separates the different levels of the Alligator range, where each type makes sense and what you should consider before choosing one.
What Makes an Alligator Bandsaw Different?
Before getting into individual machines, it's worth explaining what's actually going on inside these saws, because terms such as gravity feed, hydraulic control, double mitre and dual column get thrown around a lot without much explanation.
At their core, Alligator bandsaws are designed around a relatively simple principle: make the cutting process controlled, repeatable and robust enough to cope with demanding industrial materials. It's worth noting that not every model uses the same downfeed mechanism. Some are gravity fed, some use hydraulic control and others use a pull-down system, so it's worth checking which applies to the specific model you're looking at rather than assuming every machine in the range works the same way.
Gravity Feed
Gravity feed means the saw head descends onto the material under its own weight rather than being forced down mechanically.
That might sound like a small detail, but it makes a significant difference to how the blade behaves.
The amount of pressure being applied to the material needs to be controlled carefully. Push a blade too hard and you can strip teeth, generate excessive heat, shorten blade life and compromise the finish of the cut. Feed it too slowly and you're simply taking longer than necessary while potentially creating unnecessary heat and wear.
A gravity feed system gives the blade a controlled, consistent engagement with the material.
Hydraulic Control
On models that use it, hydraulic control works alongside the downfeed system to regulate the movement of the saw head.
Instead of an operator constantly judging how quickly the head should be lowered, the hydraulic system provides controlled downfeed. That helps maintain a consistent cutting action throughout the job and makes the machine considerably easier to operate, particularly when you're cutting difficult materials or larger sections.
For a busy workshop, that consistency matters.
The machine isn't just helping the operator make one good cut. It's helping produce the same controlled cutting action over and over again.
Mitre Swivel Heads
A large part of fabrication work isn't simply about cutting material square.
If you're producing frames, structures, brackets, handrails or other fabricated components, you'll often need angled cuts. That's where a mitre swivel head becomes particularly useful.
The saw head can be swivelled to produce mitre cuts rather than requiring the material to be repositioned or another machine to be brought into the process.
Several Alligator models also feature double mitre capability, allowing the head to swivel in both directions. That can make a surprisingly big difference when you're producing opposing angles because it reduces the need to repeatedly reposition the material.
Built for Heavy Duty Cutting
The Alligator range is intended for cutting a broad range of materials, including stainless steel, mild steel, non-ferrous metals and plastics.
The important thing isn't simply whether a machine can physically cut a particular material. It's whether its capacity, rigidity, blade specification and control system are appropriate for the work you're doing regularly.
A machine that's technically capable of handling a job isn't necessarily the machine you'd want to run all day doing that job.
That's why the Alligator range includes so many different configurations.
The Alligator Range at a Glance
The easiest way to understand the range is to split it into three main levels:
Manual Alligator bandsaws are operator controlled machines for general purpose and lower volume cutting.
Semi-automatic Alligator bandsaws remove the operator from the cutting cycle, making them better suited to regular production work.
Fully automatic CNC Alligator bandsaws are programmable machines designed for repeat production, batch cutting and applications where operator time and consistency are important.
Within those three groups, you'll also find important differences such as double mitre heads, hydraulic bow lift, dual column construction and specialist configurations.
The machine doesn't necessarily get "better" as you move up the range. It becomes more automated and, in many cases, more capable of handling larger or more demanding production requirements.
Manual Alligator Bandsaws
For many workshops, a manual machine is exactly what is required.
Manual Alligator bandsaws are straightforward to operate. The operator loads and positions the material, sets the required cutting angle where applicable, starts the machine and manages the cutting operation. The downfeed system then controls the saw head as it works through the material.
This makes manual machines particularly well suited to fabrication shops, engineering workshops, maintenance departments and businesses where cutting requirements vary from job to job.
You're not paying for automation that you don't necessarily need.
At the same time, you're still getting an industrial machine rather than a light duty workshop saw.
The HD180 is the compact end of the Alligator range, with a 130mm round capacity and 180mm jaw capacity.
It's a useful option for workshops that regularly work with smaller sections but still want the construction and controlled cutting characteristics of a heavy duty bandsaw.
The smaller footprint and capacity make it particularly appropriate where material sizes are relatively modest and cutting volumes don't justify moving into a larger machine.
For general fabrication, maintenance work and smaller section cutting, the HD180 provides a practical entry point into the range.
The HD280LR moves up to a 235mm round capacity and 280mm jaw capacity and adds double mitre capability.
That makes it a useful step up for fabrication work where angled cuts are part of the regular workload.
Being able to swivel the head in both directions means you can produce opposing mitres without continually changing the orientation of the material. For a workshop producing fabricated frames or components, that can make the cutting process considerably more efficient.
The HD305R provides a 260mm round capacity and 305mm jaw capacity with mitre cutting capability.
It's a good general purpose option for businesses that have outgrown the smaller machines but don't need the additional capacity of the larger 375mm or 400mm models.
As with the rest of the manual range, the emphasis is on giving the operator control while allowing the downfeed system to manage the cutting action consistently.
With a 300mm round capacity and 375mm jaw capacity, the HD375R is aimed at larger fabrication and engineering applications.
The additional jaw capacity gives you more flexibility when working with larger sections, while the mitre head means the machine isn't restricted to straightforward 90 degree cropping.
If your material sizes regularly approach the upper end of the HD305R's capacity, moving up to a machine such as the HD375R can provide useful headroom rather than running a smaller saw at the limits of what it can comfortably handle.
The HD375LR has the same 300mm round and 375mm jaw capacity but adds double mitre capability.
For workshops where mitred components are a regular part of production, that additional flexibility can be more valuable than simply having a larger capacity.
It's worth considering the cutting process as a whole rather than looking only at the headline capacity. If your operator is repeatedly cutting opposing angles, the ability to swivel the head both ways can save handling time throughout the working day.
The HD375LR-H combines double mitre capability with a hydraulic bow lift, while maintaining a 300mm round and 375mm jaw capacity.
The hydraulic bow lift adds another level of powered control to the machine and is worth considering where ease of operation and handling are important considerations.
It's a good example of how the Alligator range doesn't simply jump from "manual" to "automatic". There are machines within the manual category that introduce additional hydraulic functionality while retaining operator control over the overall process.
At the larger end of the manual range sits the HD400LR-H, with a 330mm round capacity and 400mm jaw capacity.
It features double mitre capability and a 34mm blade, making it a substantial manual bandsaw for workshops handling larger sections.
If your work regularly involves material around the 300mm plus range, the additional capacity of the HD400LR-H can provide useful flexibility without necessarily stepping into semi-automatic production machinery.
Who Are Manual Alligator Bandsaws For?
Manual machines make the most sense when:
Your cutting requirements vary significantly from job to job.
You're producing relatively small batches.
An experienced operator is already available to run the saw.
You need mitre cutting but don't necessarily need automatic cycling.
You want industrial cutting performance without paying for automation you won't use.
Floor space, budget or production volume makes a larger automatic machine unnecessary.
For many fabrication shops, this is the sweet spot.
Semi-Automatic Alligator Bandsaws
If a manual bandsaw spends a significant part of the day cutting the same type of material, it may be worth taking the operator out of part of the cutting cycle.
That's where the SAF semi-automatic range comes in.
Once the material is positioned and clamped, the machine can automatically cut, return the head and unclamp on completion. The operator is then free to prepare the next piece, load another machine or get on with another task while the cycle finishes.
It's worth being clear about where the time saving actually comes from. The cutting itself takes the same amount of time as it would on a manual gravity machine; the blade still needs to work through the material at the same rate. What changes is that the operator no longer has to stand at the saw physically clamping and unclamping the workpiece for every cut, and that's where a semi-automatic machine earns back operator time over the course of a shift.
The HD375LR SAF provides a 300mm round capacity and 375mm jaw capacity, with double mitre capability.
It's a natural step for businesses moving from manual cutting into more repetitive production.
You still have the flexibility associated with a relatively compact mitre machine, but the automatic cutting cycle reduces the amount of operator involvement required for each piece.
The HD400 SAF offers 330mm round and 400mm jaw capacity with hydraulic control and a 34mm blade.
It's suited to businesses that need a larger cutting envelope while also wanting the productivity advantages of semi-automatic operation.
For regular section cutting, that combination can make a noticeable difference over the course of a working week.
The HD460 SAF steps up to 400mm round capacity and 460mm jaw capacity, with double mitre capability.
At this size, the machine starts to become particularly useful for heavier fabrication and larger structural sections where both capacity and production efficiency matter.
The HD510 SAF has a 380mm round capacity and 510mm jaw capacity, again with double mitre capability.
The larger jaw opening gives you additional flexibility when dealing with wide sections that don't necessarily have a corresponding increase in round bar diameter.
This is an important point when comparing bandsaws: round capacity isn't the only measurement that matters.
A machine may have a substantial round capacity but still be unsuitable for a particular rectangular, square or structural section. Always compare the actual dimensions of the material you're cutting against the machine's jaw capacity and cutting envelope.
The HD620 SAF moves into genuinely large capacity cutting with a 500mm round capacity and 620mm jaw capacity, plus double mitre capability and a 41mm blade, a real advantage at this size for anyone processing heavier sections.
For larger fabrication and structural work, this sort of capacity can eliminate the need to break down or manipulate large sections simply to fit a smaller machine.
When you're regularly cutting large material, machine capacity isn't just about whether the section fits. It's about being able to process it efficiently and safely without turning every cut into a material handling exercise.
Dual Column Alligator Bandsaws
As capacities increase, rigidity becomes increasingly important.
This is where the DC dual column machines come into their own.
A conventional bandsaw head needs to remain stable as the blade works through the material. On large and heavy sections, the cutting forces involved can be substantial. Any unwanted movement or flex can affect blade tracking, cutting accuracy and blade life.
Dual column construction provides additional support either side of the blade.
The result is a much more rigid cutting arrangement, particularly when the machine is working on large section solids and heavy structural material.
For workshops working regularly at the larger end of the capacity range, this isn't simply a nice feature to have. It's one of the reasons dual column machines exist in the first place.
The HD360 DC SAF is a dual column semi-automatic machine with a 330mm round capacity and 360mm jaw capacity.
It's a useful entry point into the dual column range for businesses that need additional rigidity without moving immediately into the very largest machines.
The HD700 DC SAF provides a substantial 520mm round capacity and 700mm jaw capacity.
At this level, you're dealing with significantly larger material, and the rigidity of the dual column design becomes increasingly valuable.
For heavy fabrication, structural steelwork and larger section processing, this is the sort of machine where capacity and construction need to be considered together.
The HD800 DC SAF increases capacity again to 640mm round and 800mm jaw.
It's intended for businesses regularly processing large sections where a standard single column arrangement simply isn't the right solution.
The HD800.620 DC SAF provides a 720mm round capacity and 800mm jaw capacity.
The particularly large round capacity makes it suited to demanding applications where large solid or tubular material is a regular part of production.
At the top end of the semi-automatic range is the HD1100 DC SAF, with an impressive 640mm round capacity and 1100mm jaw capacity, the largest jaw opening in the whole Alligator range.
This is a machine for genuinely large section work.
At this scale, the combination of dual column construction, hydraulic control and semi-automatic operation gives the operator a machine capable of handling substantial material while still reducing the amount of manual involvement required in each cutting cycle.
Specialist Material Grid Cutting
The HD1100 DC GR is a good example of why choosing a bandsaw shouldn't be based purely on capacity.
This dual column semi-automatic machine is configured specifically for material grid cutting.
If your business has a specialist cutting requirement, it's worth discussing it rather than assuming that a standard machine is your only option. The Alligator range includes different configurations because different fabrication processes place different demands on a bandsaw.
Sometimes the right answer isn't simply "buy the biggest machine."
It's "buy the machine configured for the work you actually do."
Fully Automatic CNC Alligator Bandsaws
At the top of the range are the fully automatic CNC machines.
This is where the bandsaw becomes much more than a cutting machine operated by an individual.
You program the required parameters, including the size and quantity of the cuts, and the machine handles the production cycle.
Depending on the model and application, this can include material feeding, indexing, cutting and repeat cycling.
The operator's role moves away from manually controlling every cut and towards loading, setting and supervising the process.
That's a major advantage when you're producing batches. Imagine cutting 100 identical lengths manually. Even if the actual cutting time is relatively short, somebody still needs to measure, position, clamp, cut, release and repeat the process.
Over hundreds or thousands of cuts, the operator time adds up quickly. CNC automation is designed to take that repetitive work away. The single column CNC models in the Alligator range have a jaw capacity of up to 360mm, while the semi-automatic and dual column ranges offer larger capacities for applications requiring greater cutting capacity.
The Dynamic 2.6 provides a 260mm round and 260mm jaw capacity and is positioned as a budget automatic bandsaw.
That makes it an interesting option for businesses that want to move into automatic cutting without immediately investing in one of the larger premium CNC machines.
It's particularly relevant where production requirements are growing but material sizes remain relatively manageable.
The Dynamic 3.0 increases capacity to 300mm round and 300mm jaw while retaining the budget automatic positioning.
For businesses looking to automate repetitive cutting at this capacity level, it provides a route into CNC production without necessarily moving to the largest or most expensive machine in the range.
Touch Screen CNC Alligator Bandsaws
The HD CNC machines take automation further with touch screen control.
The appeal here isn't simply having a modern looking control panel.
The real benefit is being able to program the cutting process and then allow the machine to repeat that process consistently.
The HD260 CNC provides 260mm round and 260mm jaw capacity with touch screen control.
It's a compact CNC option for businesses where repeatability and reduced operator involvement are important but very large sections aren't part of the workload.
The HD300 CNC offers 300mm round capacity and 305mm jaw capacity.
The extra jaw capacity compared with the HD260 CNC gives you additional flexibility when working with rectangular and structural sections.
The HD330 CNC provides 330mm round and 360mm jaw capacity.
It's another step up in the standard column CNC range and is suited to businesses where larger material and repeat production need to be handled together.
Dual Column CNC Alligator Bandsaws
For businesses that need CNC automation and large section cutting, the range combines both technologies.
The dual column CNC machines provide the additional rigidity associated with dual column construction while also giving you programmable automatic operation.
The HD300 DC CNC has a 300mm round capacity and 360mm jaw capacity.
The dual column design provides additional rigidity compared with a standard column arrangement, while CNC control allows repetitive cutting cycles to be programmed.
The HD330 DC CNC provides 330mm round and 360mm jaw capacity.
It's a useful choice where the additional structural rigidity of a dual column machine is important but the workload doesn't justify moving into the very largest models.
The 700 DC CNC represents a significant jump in capacity, with 520mm round and 700mm jaw capacity.
This is where the combination of large section cutting and CNC automation becomes particularly powerful.
For businesses processing repeat batches of large structural sections, the ability to automate the cutting cycle while maintaining the rigidity of a dual column machine can have a major impact on throughput.
The HD700.550 DC CNC provides 550mm round and 700mm jaw capacity.
It combines the large cutting envelope with touch screen control and dual column construction, making it suitable for production environments where both material size and repeatability are important.
Alligator Master 3.0 CNC
The Master 3.0 CNC sits towards the premium end of the Alligator range, with a 300mm round capacity and 305mm jaw capacity.
What sets it apart isn't just the capacity figures. It's built around a compact, hollow profile arm that keeps the hydraulic and electrical circuits protected while helping the machine hold a smaller footprint than you might expect for what it can do. Material feed runs through a servomotor and precision ball screw rather than a simpler mechanism, which keeps positioning accurate even when several workpieces are clamped together, and the feed rate can be adjusted across three settings to suit the weight of what's being cut. The workpiece itself sits on a roller track rather than being dragged along a fixed surface, which cuts down on abrasion and wear during handling.
Clamping is handled by both a feed vice and a main vice, with the option to add a vice behind the cut for extra stability or a retractable jaw on the feed vice for material that isn't perfectly straight. The top clamps run independently of each other, which makes it easier to hold bundles of material securely and evenly.
When it comes to cutting, the Master 3.0 is built for accurate, repeatable production work across materials including steel, stainless steel, alloy
steels and tool steels. It can cut up to 300mm round at 90°, with square capacities up to 285mm and rectangular sections up to 305 x 290mm.
Mitre cutting is available from 90° down to 45°, while the variable blade speed of 15 to 90m/min allows the machine to be set up to suit different materials and blade types. Cutting pressure is controlled hydraulically and adjusted automatically during the cycle, helping to maintain consistent performance without putting unnecessary load on the blade. The blade also approaches and returns automatically according to the material size, keeping movement to a minimum and helping to reduce cycle times. With a minimum remnant of just 125mm, the machine can also make better use of expensive bar and section material by reducing waste.
Beyond the cutting cycle itself, the control system also tracks useful production data, including cutting times, blade consumption and operator productivity, and can flag maintenance and diagnostic issues before they become a problem. The machine can also be connected to a wider production line or monitored remotely, with status alerts available by SMS or via a warning beacon.
For workshops after a genuinely premium CNC option without moving up to the largest dual column machines, the Master 3.0 CNC is worth a closer look. Full specifications are available on request.
Manual vs Semi-Automatic vs CNC: Which Is Right?
One of the easiest mistakes to make when buying a bandsaw is to assume that the most automated machine must be the best machine.
It isn't.
The best machine is the one that makes economic and practical sense for your workload.
Manual is usually right when:
You cut relatively small quantities.
Material sizes and shapes vary considerably.
Jobs are often one offs or small batches.
Your operator needs to make decisions throughout the cutting process.
You don't need the machine running unattended.
Keeping the initial investment lower is important.
Semi-automatic is usually right when:
You're cutting regularly throughout the day.
You often cut batches of the same or similar material.
You want to reduce operator involvement.
The operator could be doing other work while the saw is cutting.
Production has increased beyond what makes sense for a manual machine.
You need larger capacity or dual column cutting.
CNC is usually right when:
You're producing repeat components.
You regularly cut large batches.
Consistent lengths and quantities are critical.
Operator time is becoming a significant production cost.
You want to reduce repetitive manual handling.
You need programmable cutting cycles.
Throughput and repeatability are priorities.
There's no magic production volume at which you suddenly "need" CNC.
The useful question is:
How much time is your operator spending doing work that the machine could be doing instead?
If the answer is "a lot", it's probably time to look at automation.
What Capacity Do You Actually Need?
Bandsaw specifications can be confusing because manufacturers often quote several different capacities.
You'll see terms such as round capacity and jaw capacity.
Round capacity is relatively straightforward: it's the maximum stated diameter of round material the machine is designed to cut.
Jaw capacity refers to the available cutting width for other shapes, such as square, rectangular and structural sections.
The important thing is to look at the material you actually cut.
For example, if you're regularly cutting a large rectangular section, a machine's round capacity isn't particularly useful on its own. You need to know whether the section will physically fit within the available jaw and cutting envelope.
Don't Buy Purely for Your Biggest Ever Job
It's tempting to buy a machine based on the largest piece of material you've ever had to cut.
That's not always the best approach.
If 95% of your work fits comfortably through a 400mm machine and you only occasionally receive a larger job, buying a much larger machine may mean paying for capacity that sits unused most of the time.
Instead, look at your typical maximum working size.
What do you cut every week?
What do you expect to be cutting over the next few years?
And how often do you realistically expect to exceed that size?
Those questions will usually give you a much better indication of the right machine.
Don't Forget Blade Selection
A bandsaw is only as good as the blade fitted to it.
That might sound obvious, but blade selection has a major effect on cutting performance, blade life and the quality of the finished cut.
Different materials and section sizes place different demands on the blade. Stainless steel, mild steel, non-ferrous metals and plastics don't all behave in the same way during cutting.
To get the best from an Alligator machine, the blade needs to be matched to both the material and the application.
That's why we stock a full range of Alligator bandsaw blades matched specifically to the machines.
The right blade, combined with the correct cutting parameters and downfeed control, allows the saw to work as it was intended.
And because blades are a consumable, getting this right isn't just about cut quality. It can have a direct effect on your ongoing operating costs.
Why Hydraulic Control Matters More as Capacity Increases
Hydraulic control is useful on the models that feature it, and its importance becomes increasingly obvious as the size of the material increases.
Cutting a small section is one thing.
Cutting through a large solid bar or heavy structural section is another.
The forces involved are much greater, and inconsistent feed pressure can quickly turn into excessive blade wear, poor finishes or damaged teeth.
A controlled hydraulic feed gives you a more predictable cutting process.
That becomes particularly important on the larger Alligator machines, where the saw may be working through substantial quantities of metal.
When Should You Choose a Dual Column Machine?
If you're looking at the larger end of the Alligator range, you'll quickly come across the term DC.
It stands for dual column.
The basic idea is simple: instead of relying on a single support arrangement, the saw head is supported by columns on both sides of the blade.
That additional support increases rigidity.
Why does that matter?
Because larger sections put considerably more load through the blade and machine structure. A rigid machine helps keep the blade tracking accurately through the cut rather than allowing unwanted movement or deflection.
For regular large section cutting, a dual column machine is therefore worth serious consideration.
It's particularly relevant if you're cutting:
Large solids
Heavy wall tube
Structural sections
Large rectangular sections
High value material where cut accuracy matters
Large batches where blade life is important
What About Mitre Cutting?
If every cut you make is a straight 90 degree cut, you may not need a mitre machine.
If you're fabricating frames, structures, brackets, supports or other components where angles are part of the finished product, however, mitre capability can save a considerable amount of time.
A swivel head bandsaw allows you to change the cutting angle without having to find another way of positioning the material.
A double mitre machine goes a step further by allowing the head to swivel both left and right.
That is particularly useful when you're producing opposing mitres.
Instead of continually turning and repositioning large or awkward sections, you can change the head direction and continue cutting.
On smaller material this might save only a little time.
On larger material, where repositioning involves cranes, rollers or multiple people, the difference can be much more significant.
What Materials Can Alligator Bandsaws Cut?
The Alligator range is designed to cut a broad range of industrial materials, including:
Stainless steel
Mild steel
Non-ferrous metals
Plastics
Solids
Tubes
Sections
Structural material
The exact blade, cutting parameters and machine configuration should always be considered for the particular material and section being processed.
This is another reason why it's useful to speak to someone before buying.
A bandsaw isn't an isolated piece of equipment. Blade choice, material, section size, cutting speed, feed pressure and production volume all interact with one another.
Getting the machine right is the first step.
Getting the whole cutting process right is what delivers the result.
How Much Automation Do You Really Need?
Automation is valuable, but only when you're actually going to use it.
If you're cutting one off pieces all day and every job has different dimensions, a fully automatic CNC machine may not provide the return you'd expect.
Your operator may spend as much time changing settings and loading different jobs as they would have spent manually operating the saw.
On the other hand, if you're cutting 200 identical components, automation can completely change the economics of the job.
The operator can load the material, program the machine and allow the saw to work through the batch rather than manually supervising every individual cut.
That's where CNC really earns its keep.
The decision isn't therefore simply:
Manual = cheap, CNC = expensive.
It's:
How much of your cutting process can you profitably automate?
Choosing an Alligator Bandsaw for Your Workshop
A good starting point is to write down five things:
1. Your Material
What are you cutting?
Stainless steel? Mild steel? Aluminium or other non-ferrous metals? Plastics?
2. Your Largest Regular Section
Measure the actual material rather than relying on a general description such as "large box section".
Record the maximum round diameter and the largest width and height of rectangular or structural sections.
3. Your Average Batch Size
Are most jobs one to five cuts?
Twenty?
One hundred?
Several thousand?
This will give you a much clearer indication of whether manual, semi-automatic or CNC operation makes sense.
4. Your Required Cutting Angles
If you regularly produce mitred components, look at the swivel head and double mitre options.
5. Your Operator Requirements
Think about what your operator is doing while the saw is running.
If they have to stand beside the machine throughout the cycle, you're paying for labour that might potentially be redirected elsewhere.
If the operator could load the machine, start the cycle and move onto another task, semi-automatic or CNC could offer a significant productivity advantage.
Built to Be Kept Running
Buying a bandsaw is a long term investment.
The purchase price matters, but it's only part of the equation.
Downtime matters.
Blade consumption matters.
Service availability matters.
Parts availability matters.
And the ability to get someone on the phone who understands the machine matters when you've got production waiting.
That's why we don't just supply the Alligator machines and leave you to figure the rest out.
Every Alligator bandsaw we supply comes backed by our own servicing, parts and training, plus a 1 year warranty as standard.
We've been building and supporting Alligator bandsaws for nearly three decades, so our engineers know these machines inside out.
That means we're able to help with more than simply supplying a replacement part.
We can help diagnose problems, advise on blades and cutting performance, provide servicing and support your operators with the training they need to get the best from the machine.
Finance and Custom Built Machines
A new industrial bandsaw is a significant investment, particularly once you move into the larger semi-automatic and CNC machines.
We offer finance options across the Alligator range, allowing businesses to spread the cost of the machine rather than tying up all of their capital in a single purchase.
And sometimes the right machine isn't actually one of the standard machines in the catalogue.
If your application has unusual capacity, handling or production requirements, we can also quote for custom built machines.
That could be particularly relevant where your material, production process or available floor space doesn't fit neatly into an off the shelf specification.
The Full Alligator Bandsaw Range
For reference, the current range covers:
Manual Alligator Bandsaws
HD180 - 130mm round / 180mm jaw
HD280LR - 235mm round / 280mm jaw, double mitre
HD305R - 260mm round / 305mm jaw, mitre
HD375R - 300mm round / 375mm jaw, mitre
HD375LR - 300mm round / 375mm jaw, double mitre
HD375LR-H - 300mm round / 375mm jaw, double mitre / hydraulic bow lift
HD400LR-H - 330mm round / 400mm jaw, double mitre / 34mm blade
Semi-Automatic Alligator Bandsaws
HD375LR SAF - 300mm round / 375mm jaw, double mitre
HD400 SAF - 330mm round / 400mm jaw, 34mm blade
HD460 SAF - 400mm round / 460mm jaw, double mitre
HD510 SAF - 380mm round / 510mm jaw, double mitre
HD620 SAF - 500mm round / 620mm jaw, double mitre / 41mm blade
HD360 DC SAF - 330mm round / 360mm jaw, dual column
HD700 DC SAF - 520mm round / 700mm jaw, dual column
HD800 DC SAF - 640mm round / 800mm jaw, dual column
HD800.620 DC SAF - 720mm round / 800mm jaw, dual column
HD1100 DC SAF - 640mm round / 1100mm jaw, dual column
HD1100 DC GR - dual column machine for material grid cutting
Fully Automatic CNC Alligator Bandsaws
Dynamic 2.6 - 260mm round / 260mm jaw, budget automatic
Dynamic 3.0 - 300mm round / 300mm jaw, budget automatic
HD260 CNC - 260mm round / 260mm jaw, touch screen control
HD300 CNC - 300mm round / 305mm jaw, touch screen control
HD330 CNC - 330mm round / 360mm jaw, touch screen control
HD300 DC CNC - 300mm round / 360mm jaw, dual column CNC
HD330 DC CNC - 330mm round / 360mm jaw, dual column CNC
700 DC CNC - 520mm round / 700mm jaw, dual column CNC
HD700.550 DC CNC - 550mm round / 700mm jaw, dual column / touch screen control
Master 3.0 CNC - 300mm round / 305mm jaw, premium CNC
So, Which Alligator Bandsaw Is Right for You?
There isn't a single "best" Alligator bandsaw.
The right machine depends on the relationship between material size, material type, cutting volume, cutting angle, operator time and budget.
If you're cutting a mixture of materials in relatively small quantities, a manual machine may be all you need.
If the saw is running continuously throughout the day and the operator is spending significant amounts of time waiting for cuts to finish, a semi-automatic machine could be the logical next step.
If you're producing large batches of repeat components, CNC automation can take that process considerably further.
And if you're working with large structural sections, the additional rigidity of a dual column machine may be just as important as the automation itself.
The good news is that you don't need to work all of that out on your own.
With capacities ranging from the compact HD180 at 130mm round and 180mm jaw right through to the HD1100 DC SAF at 640mm round and 1100mm jaw, there is a substantial amount of choice within the Alligator family.
Our job is to help you narrow it down.
Talk to Us Before You Buy
With this many models across three tiers, choosing the right machine really does come down to your specific application.
Tell us what you're cutting, the size of the material, how many pieces you're producing and whether you need straight or mitre cuts. We'll help you work out which machine makes the most sense rather than simply pointing you towards the biggest model.
We can provide free guidance, pricing and custom quotes across the full Alligator range, as well as advice on blades, servicing, training and finance.
Call our team on 01892 663398.
No hard sell. Just the right saw for the right job.
Share this post:
